BPS Integrated Pump System Series
More Integration - Less Cabling Effort
BPS-i30
Within the BPS-i Series the controller and the motor are integrated into the driver housing.
Like all LEVITRONIX pumps the BPS-i30 pump is a revolutionary centrifugal pump that has no bearings to wear out or seals to break down and fail. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor. Both the impeller and casing are fabricated from chemicalresistant high purity fluorocarbon resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.
Flow/Pressure Curves BPS-i30
BPS-i30 Facts
| Max. Differential Pressure: | 1.5 bar | 22 psi |
| Max. Flow: | 7.4 liters/min | 2 gallons/min |
| Max. Liquid Temperature: | 70 °C | 158 °F |
| Wet Materials: | PTFE / PTFE | |
| Supply Voltage: | 35 W / 24 VDC | |
System Benefits
- Extremely low particle generation due to the absence of mechanically contacting parts
- Increased equipment uptime
- Lower maintenance costs by eliminating valves, bearings, rotating seals and costly rebuilds
- Very low integration costs as no external controller is needed for speed or closed loop control
- Reduced risk of contamination due to the self-contained design with magnetic bearings
- Very gentle to sensitive fluids due to low-shear design
- No narrow gaps and fissures where particles or microorganisms could be become entrapped
- Smooth, continuous flow without pressure pulsation
- Electronic speed control
- Compact design compared to pneumatic and mag-drive pumps
- Proven technology in medical and semiconductor industry (MTBF > 50 years)
