BPS-600

The BPS-600 pump system is a revolutionary centrifugal pump that has no bearings to wear out or seals to break down and fail. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor. The impeller and casing are both fabricated from chemical-resistant high purity fluorocarbon resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.

The system consists of a controller with an integrated user panel to set the speed manually and a PLC to set the speed with an analoge signal.

Flow/Pressure Curves BPS-600

Flow/Pressure Curves BPS-600

BPS-600 Facts

Max. Differential Pressure: 3.2 bar 46 psi
Max. Flow: 75 liters/min 20 gallons/min
Max. Liquid Temperature: 90 °C 194 °F
Wet Materials: PFA / PTFE / Perfluoroelastomer
Supply Voltage: 600 W / 48V DC

System Benefits

  • Extremely low particle generation due to the absence of mechanically contacting parts
  • Increased equipment uptime
  • Lower maintenance costs by eliminating valves, bearings, rotating seals and costly rebuilds
  • Reduced risk of contamination due to the self-contained design with magnetic bearings
  • Very gentle to sensitive fluids due to low-shear design
  • No narrow gaps and fissures where particles or microorganisms could be become entrapped
  • Smooth, continuous flow without pressure pulsation
  • Electronic speed control
  • Compact design compared to pneumatic and mag-drive pumps
  • Proven technology in medical and semiconductor industry (MTBF > 30 years)
Levitronix BPS-600
Contamination Free Fluid Handling