BPS-600 Life Science
The BPS-600 Life Science pump system is a revolutionary centrifugal pump that has no bearings to wear out or seals to break down and fail. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor. The impeller and casing are both fabricated from chemical-resistant high purity fluorocarbon resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.
The system consists of a controller with an integrated user panel to set the speed manually and a PCL to set the speed with an analoge signal.
Flow/Pressure Curves BPS-600 Life Science
BPS-600 Life Science Facts
| Max. Differential Pressure: | 3.2 bar | 46 psi |
| Max. Flow: | 75 liters/min | 20 gallons/min |
| Max. Liquid Temperature: | 90 °C | 194 °F |
| Wet Materials: | PVDF / PFA / Silicon all FDA conform |
|
| Supply Voltage: | 600 W / 48V DC | |
System Benefits
- Reduced risk of contamination due to the self-contained design with magnetic bearings
- No narrow gaps between the impeller and pump casing where bacteria could be entrapped
- Low shear-forces
- Pump head made of steam sterilizable FDA listed materials
- Easy disammbling of pump casing for cleaning
- Aseptic pump casing design with Triclam fittings and sealing technology
- Small size
- No particle generation
- Dry running capability
- Proven technology in the medical (blood pumps) and semiconducter (high-purity pumps) industries
Contamination Free Fluid Handling
